ELBA BUILT-IN VITRO CERAMIC COOKTOP E230-050X

• Cooking Zone: 
Number of Cooking Zones: 2 vitroceramic heating zones

1. Hi-Light heater 145mm, power: 1200W​
2. Hi-Light heater 180mm, power: 1800W

• Control Panel
3. Front zone control knob
4. Front zone residual heat indicator
5. Power indicator light
6. Rear zone residual heat indicator
7. Rear zone control knob

INFORMATION FOR THE INSTALLER
1. Before installing the cooktop, remove the protective film. This cooktops are designed to be embedded into kitchen fixtures measuring 600 mm in depth and from 30 to 40 mm thick for vitroceramic cooktop.2. In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in figs. 1 has to be made, keeping in consideration the following:

• within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or internal shelf there must be a clearance of at least 30 mm;
•  the cooker top must be kept no less than 50 mm away from any side wall;
• the cooker top must be kept at a distance of no less than 50 mm from the rear wall.
• there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 2).

​