ELBA 2506A-90 X

​• Number of Motor(s):1
• Rated motor input power: 115W
• Suction power: 250 m3/hr
• Controls: Push button controls
• Lighting: 2W x 2 LED lights
• Charcoal Filter(s): 1
• Grease Filter: Aluminum cassette filters
• 3 speed settings
• Recirculation and ducting available

Width: 500 mm, 600 mm, 800 mm, 900 mm
Depth: 500 mm
Height: 150 mm
Duct Size Diameter: 120mm (required)
Maximum Electric Input: 119W

​​​​TECHNICAL DIAGRAM

​​INFORMATION FOR THE INSTALLER​

• The hood should be placed at a distance of 65-75cm from the cooking surface for maximum performance.
• The exhaust pipe should have a minimum diameter of 120 millimeters (mm)

Installation Method A – Wall Mount

1. Drill four (4) Ø 8mm holes in a suitable place according to the centre distance of the mounting points at the back of the unit.
2. Insert the nut into the holes.
3. Insert the screws into the nuts and tighten.
4. Put up the cooker hood onto the fixed screws.
5. Then use the attached accessories enclosed to turn the screws onto the two holes inside the hood, and then fix the screws to tighten the hood onto the wall.
6. Put the one way valve onto the cooker hood.

​Installation Method B – Cabinet Mount

1. Drill six (6) Ø 4mm holes at the bottom of the hanging cupboard.
2. Put the one-way valve on the cooker hood, then install the hood on the bottom of the cupboard, tighten the hood with enclosed 6 screws.
3. Install the adjusted board on the bottom of the hood in order to keep out the gap between hood back and cupboard.